When you need a more than reliable Cover or Tarp to properly shield your hard to cover cylinders, cylindrical shaped equipment, and other round gear, Tarps Now provides Custom Cylinder Covers and Custom Equipment Tarps to fit almost any circular dimensions. You can get one easily and quickly manufactured by utilizing our Custom Made Cylinder Covers app above.
These Heavy Duty Tarps are made of high quality material such as vinyl, poly, canvas, and mesh. All you have to do is provide the specs, including height and diameter. Then include grommets information such as being spaced 6, 12, or 24 inches apart on the bottom, or none at all. You will also have the option of ordering a drawstring along the bottom to help keep the Custom Cover tight at the base.
Simply fill in the easy-to-use form shown above on this very page and you can get the process rolling so we can create your Cylinder Covers. These usually take 2-3 weeks to design, manufacture, inspect, and ship. The Custom Cylinder Covers are Made in the USA.
If you have additional questions or need help with the ordering or working with the custom app, please contact us at (888) 800-1383 or sales@tarpsnow.com where one of our experienced and pleasant team member located at our Southwest Michigan headquarters looks forward to speaking with you.
Please choose one of the following options for either grommets, d-rings, velcro or none to your custom tarp. We offer grommets and d-rings with various spacing options.
Grommets Our heavy duty grommets are made from brass so they do not rust. These grommets have an inside diameter opening of 3/8". Grommet spacing options of approximately 6", 12", 18" and 24" apart and in the (4) corners. The center of the grommet is spaced approximately 3/4" from the edge of the tarp.
D-RIngs These strong zinc plated D-Rings are sewn to the tarp with 1" webbing. Each D-Ring is 1" in width and securely sewn to the perimeter of the tarp. D-Ring spacing options of approximately 12" and 24" apart. The D-Rings extend from the perimeter of the tarp 1" and are not included in the measurement of the tarp.
Velcro By choosing this option, you will receive your custom tarp with 2" wide Black, velcro sewn to the backside of the tarp. The Female velcro is included on all four edges of the underside of the tarp. Included in this option is a separate piece of the Male, Black velcro, which has an adhesive backing
About Additional Options
These options are available in addition to our fastener options. You are not required to chose one of the following options.
Reinforcement Webbing This option will reinforce the perimeter of your tarp with a 2" wide seat belt webbing. This webbing is sewn into the hem and is typically used to help strengthen the tarps and protect the grommets from pulling out..
Grommets Our heavy duty grommets are made from brass so they do not rust. These grommets have an inside diameter opening of 3/8". Grommet spacing options of approximately 6", 12", 18" and 24" apart and in the (4) corners. The center of the grommet is spaced approximately 3/4" from the edge of the tarp.
D-RIngs These strong zinc plated D-Rings are sewn to the tarp with 1" webbing. Each D-Ring is 1" in width and securely sewn to the perimeter of the tarp. D-Ring spacing options of approximately 12" and 24" apart. The D-Rings extend from the perimeter of the tarp 1" and are not included in the measurement of the tarp.
Velcro By choosing this option, you will receive your custom tarp with 2" wide Black, velcro sewn to the backside of the tarp. The Female velcro is included on all four edges of the underside of the tarp. Included in this option is a separate piece of the Male, Black velcro, which has an adhesive backing
Reinforcement Webbing This option will reinforce the perimeter of your tarp with a 2" wide seat belt webbing. This webbing is sewn into the hem and is typically used to help strengthen the tarps and protect the grommets from pulling out..